Skip to content

Cart

Your cart is empty

Restoration of Metal Detecting Finds and Historical Jewellery

A coin that has spent six hundred years in field soil rarely comes out flat. Hammered pennies and groats turn up folded, creased or curled, rings are squeezed oval, and thin gold can be bent double. I am a working jeweller, self-employed since 2006, and I straighten and reshape finds for detectorists and collectors. I do it carefully, and I do it without taking the patina away.

Before and after

A folded medieval gold coin held in tweezers, bent over on itself, with part of a ship and shield design visible The same medieval gold coin crumpled and creased as it came out of the ground, held in tweezers

Before: a medieval gold coin as it came out of the ground, folded and crumpled.

The straightened medieval gold coin lying flat, showing a crowned figure standing in a ship holding a shield, with lettering around the edge The straightened medieval gold coin lying flat, cross and quatrefoil side, with the lettering and design clear

After: straightened by hand, with both faces and the original surface kept.

What I can do

  • Straightening coins. Bent, folded and curled hammered coins, and milled coins that have been creased or buckled.
  • Reshaping rings. Crushed, squashed and out-of-round finger rings brought back to a wearable shape.
  • Other jewellery. Bangles, pendants, brooches and similar pieces that have been bent or distorted in the ground.

I work on gold, silver and copper alloy. If your piece is something else, ask me before you post it.

The work is done slowly, by hand, in small stages, with jeweller's tools. I only anneal a piece where it is safe for the metal and its surface, and I will tell you first if I think it is needed. Every piece is looked at on its own merits, because a thick silver penny and a thin corroded ring do not behave the same way.

Looking after the patina

The patina on a find is part of its history. It shows the metal's age and the ground it came from, it often protects what is left of the surface, and on a lot of coins the detail sits in it. Polishing or stripping it takes away something you cannot put back.

So I keep my intervention to a minimum. I do not polish, clean back or re-colour a piece, and I add nothing to it: no filler, no glue, no lacquer. The aim is for the piece to come back flat or round, looking exactly like the find it was. If you would like a piece cleaned, ask, and I will tell you honestly what that would cost it.

I assess every piece first

Before I touch anything I look at the piece under magnification for cracks, brittleness and active corrosion. Old silver in particular can be brittle, and a bend that looks simple can hide a fracture. If a piece is too fragile, or if the work would harm it, I will say so, and I would rather tell you that than take your money and risk the find.

Some pieces were bent on purpose long ago. Bent and folded coins are known from the medieval period, and a deliberate bend is part of the object's story. If I think that is what I am looking at, I will say so and we can talk about leaving it as it is.

Who does the work

I have been in the jewellery trade since 2000 and an independent trade craftsman since 2006. I started in manufacturing, and when other jewellers had complex alterations, restorations or heavy repairs they could not handle in-house, they sent them to my workshop. Since then I have carried out jewellery repairs and restorations for private clients to a high standard, from restorations to complex repairs. I am an assessed member of the Guild of Master Craftsmen for jewellery manufacture, repair, retail and engraving.

Who it is for

Detectorists with a bent find they want to display or record properly. Collectors who have bought a coin or ring that has been folded. Families with a distorted piece of old jewellery that has been in a drawer for years. You do not need to have found it yourself.

How it works

  1. Send photos or bring it in. Email or WhatsApp me photos of the piece (front, back and edge, the metal if you know it, and anything you know about it), or bring it into the workshop and talk to me face to face.
  2. Estimate. From your photos I give you an estimate, and I confirm the price once I have seen the piece in hand.
  3. Delivery. Post your piece to me by Royal Mail Special Delivery, which is tracked and insured, or bring it to the workshop. I send it back to you the same way.
  4. The work. I straighten or reshape the piece by hand, as above.
  5. Return. It comes back to you with before and after photographs, which are useful for your records and for recording the find.

Questions I am asked

Will it affect the value?

I leave the patina and surface as found, so I take away nothing that a collector would look for. Opinion differs on straightening, though, and some people like a find left exactly as it came out of the ground. For a rare or valuable coin, ask a specialist or your local Finds Liaison Officer before you decide. It is your piece and your choice, and I will give you my honest view.

Should I report my find first?

Please check before you send a piece that your find has been reported or recorded properly. In England, Wales and Northern Ireland, the Treasure Act 1996 says possible Treasure must be reported to the coroner within 14 days, usually through your local Finds Liaison Officer. Many gold and silver finds more than 300 years old can qualify, as can groups of coins, and possible Treasure is best left as found until it has been reported. Scotland has its own system, called Treasure Trove. You can read the details on GOV.UK.

For finds that are not Treasure, recording them with the Portable Antiquities Scheme is good practice, ideally before any work is done. If you are not sure where your find stands, just ask me and I will happily point you in the right direction.

How long will it take?

Usually between three and six weeks, depending on the piece and how much work it needs. I will give you a time with your quote.

How much does it cost?

Every piece is different, so I give an estimate from your photos and confirm the price before I start.

Which metals do you work on?

Gold, silver and copper alloy.

Get in touch

If you have a bent coin, a crushed ring or a piece of jewellery that needs straightening, email me at Dion@britishhistoricaljewellery.co.uk or WhatsApp me on 07861 375906, with photos of the front, back and edge. I will come back to you with an estimate.

You can also bring the piece into the workshop and talk it through face to face. It is open Tuesday to Saturday, 11am to 6pm UK time, and the address is on the contact page.